Bottle caps and manufacturing tech

The main purpose of the capping machine is to tighten and loosen the caps of plastic bottles and glass bottles. The capping machine is widely used and is a very common packaging machine. In the current market, the market demand for capping machines continues to rise, so our efficiency requirements for capping machines are relatively high. However, due to limitations in technical level, scientific research strength, etc. Cover efficiency will not make much breakthrough.Plastic cap compression molding machine factory point that if the capping machine fails, not only the capping work cannot be completed, but many subsequent tasks cannot be completed. If the capping machine fails, it can be solved immediately, then the capping efficiency is also a Kind of promotion.

1. The failure of the automatic switch caused by the drift of the micro switch or the photoelectric switch, such as the failure, the working position of the position switch or the photoelectric switch can be adjusted, or the switch can be replaced.

2. The short-circuit current caused by the short circuit of the motor-level winding and the housing and the short circuit of the electrical wiring and the grounding wire can be used to check the motor on the one hand and whether the related wires are loosened on the other hand.

3. The acceleration time setting of the automatic capping machine is too short and the overcurrent fault during acceleration caused by the shock capacity exceeding the capacity of the inverter can extend the F001 value setting time appropriately, and the capacity of the electric idea cannot be changed at will.

4. The excessively high voltage during operation caused by the excessive change of the power supply voltage can be easily solved by inputting the power supply into the reactor or by appropriately reducing the power supply voltage.